S VD 5082 - 8>2 SDI Input Switch with Reference

Description
The S VD 5082 provides 8>2 SDI input switching functionality for use in a variety of applications. The unit takes 8 SDI inputs and provides two switched SDI outputs. The unit can be configured for automatic switching to next available input when designated input is lost, or can be programmed to cycle through all inputs automatically. Manual switching is possible via the control system GUI or by using the RCP 5082 simple switching panels (or provide your own)

 

Reference input provides for "clean" switching in the vertical interval (line 6 for 625 and line 10 for 525). Each output can be configured as re-clocked or non re-clocked. In re-clocked mode the module will auto-detect standard video bit rates (143, 177, 270, 360 and 540Mbits/s) and transparently pass data from 10Mbits.s to 640Mbits/s when set to non re-clocked mode. ASI / DVB signals pass transparently in non re clocked mode.

 

Microprocessor control and on board flash ram enable configurations and settings to be stored within the module (through power cycles and module removal). Local control capability is provided via the integrated dip switch and multifunction switch. Remote control, status monitoring and error reporting is possible when using the LYNX control system.

Features

  • 8>2 SDI input switch. (525/625 formats)
  • Clocked or non re-clocked SDI outputs.
  • Input presence detection for all inputs.
  • Transparent for DVB-ASI signals.
  • Auto detect video bit rates of 143,177,270,360,540Mbits/s.
  • Transparently pass data between 10 and 640Mbits/s in non re-clocked mode.
  • Synchronous switching (line 6 for 625, line 10 for 525).
  • Selectable automatic switching to next available input if input signal is lost.
  • Cyclic auto switching between available inputs (inputs and time duration configured from LYNX control system).
  • Supports simple switching control panel. (RCP 5082)
  • Microprocessor controlled with internal flash ram for storing configuration.
  • Remote control, status monitoring and error reporting possible when used with LYNX control system.
  • Full SNMP support when used with master controller option.
  • Hot swappable.

Ordering Information

 

S VD 5082 - 8>2 SDI Input Switch with Reference

 

SVD 5082 set - Package including the SVD 5082 and the RCP 5082 control panel

 

Includes: CardModule, Rear Connection Panel and Reference Manual on CD

 

Note. This modules rear connection panel takes up two rack card slots.

 

Options

RCP 5082 - 1RU Control Panel for S VD 5082. Parallel connection (3M max cable length)